Our new improved range of SunLock commercial mounting systems are 20% - 50% faster to install than traditional racking systems.

SunLock offers a wide range of commercial racking solutions specifically designed for Australian conditions.
Engineered in Australia by installers to withstand the harsh Australian environment and is compliant with AS/NZ1170.2:2021.

Which Commercial System is right for you?

- Quickest Flat to roof commercial rail system on the market
- Spans longer distances between purlins
- New Mid-Clamp design with integrated earthing
- Can be installed both perpendicular or parallel to the purlins
- Our SunLock system saves you a minimum of 15% in install time and costs.
- New Mid-Clamp design with integrated Earthing
- Our unique C-Channel rail allows for Cable Management and can also be used with our lid as cable tray
- Our Dual hole foot allows longer spans between purlins and can remove the need for 3 rails per panels in outer zones

- Designed to be an aerodynamic shape to reduce loads on the roof.
- New Mid and End-Clamp design with integrated earthing
- Spring loaded mid and end clamps reducing installation time
- Can be installed both perpendicular or parallel to the purlins
- Specifically designed for Australian Commercial rooftop solar installation
- Allows for micro inverter or optimizer installation on the tilt legs (pre-drilled holes)
- The quickest to install East West System on the market
- New Mid and End-Clamp design with integrated earthing
- Spring loaded mid and end clamps reducing installation time
- A system that provides optimal surface utilisation and yields higher energy production

- 10º or 15º configurations. are available.
- A system for structurally challenging rooftops with wide spanning purlins
- New Mid and End-Clamp design with integrated earthing
- Spring loaded Mid and End clamps reducing installation time
- Streamline SunLock Design for commercial installations
- Allows for cable tray installation on the tilt legs with predrilled holes on each tilt leg
- Less moving parts resulting in less installing time
- Allows for microinverter or optimiser installation on the tilt legs (pre-drilled holes)
- Can be installed both perpendicular or parallel to the purlins
- Perfect for North or South facing roof

- The Ultimate Portrait Commercial A frame that allows for up to 2.15m long Panel installation
- Significantly reduces installation time and cost by up to 40%
- Adjustable configurations. 10º to 15º (Above 15º is available upon request)
- Allows for cable management in our C Channel rail
- Delivered as one piece, reducing instal time/cost.
- Can be installed both perpendicular or parallel to the purlins
- Extra long frame designed for large commercial panels
- Adjustable configurations. 10º to 15º (Above 15º is available upon request)
- Slotted bottom rail for universal purlin spacing installations
- Allows for cable management in our C Channel rail text goes here
- Comes complete with Channel feet built into the adjustable top frame